PORSCHE 996 COOL CAPS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,882.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 GT2 2008
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 GT3 2007-11
$3,882.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$3,126.60
Make a selection
Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. The r-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. This kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. This deep sump oil pan kit has been approved by the Porsche club of america for use in pca club racing stock and prepared class cars.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be ca...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity)...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle actually starting. Eventually you hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter be sure to check the rubber cap on the terminal for cracks which allows moisture in and it is a good idea to check your starters hardware as well. This is the latest supersession from the manufacturer. For the early air cooled car restorations, please note that the housing looks different than the original. Sold individually. This is a new starter so a core charge is not applied.
This item may need to be sourced from ger...(choose a part on the right to read more)
View/Change Diagram
From $260.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 340mm versus 317mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 911 1998-05 911 2005-08
$1,485.00
Make a selection
The girodisc system is a direct replacement for the oe disc. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the dis...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,350.00
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,3:1
Max. Power - 180kw (245hp) @ 6500rpm
Max. Torque - 273nm (199lbf ft) @ 4600-6000rpm
Max. Speed - 258km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.1s
Tuning:
Max. Power - 204kw (277hp) @ 6500rpm
Max. Torque - 301nm @ 4500-6000rpm
Max. Speed - 269km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.8s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08
$8,611.90
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,485.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$1,485.00
Make a selection
The girodisc system is a direct replacement for the oe disc on all 997.2 GT3/gt2's, with or without the OEM pccb rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2010-13
$1,620.00
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
kit includes:
Sport motronic dme exch, sportairfilter (2), Cayenne turbo 70mm GT sport exhaust system, sport turbochargers (2).
FVD level 4 kit for the Cayenne turbo produces 600bhp while keeping stock driveability! This kit is the ultimate Cayenne turbo kit for both performance and sound!
Genuine:
Engine - v8 twin-turbo
Capacity - 4511ccm
Compression ratio - 9,5:1
Max. Power - 331kw (450hp) @ 6000rpm
Max. Torque - 620nm (457 lbf ft) @ 2250-4750rpm
Max. Speed - 266km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 441kw (600hp) @ 6000rpm
Max. Torque - 800nm (590 lbf ft) @ 4000rpm
Max. Speed - 300km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
- a sim...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$23,010.25
Make a selection
Ksports circuit pro damper system provides the ultimate in adjustability for enthusiasts and professionals alike, who are wishing to have the maximum in performance and durability. With years of engineering, testing and development, the circuit pro damper system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving. The uncompromising range of adjustability on the circuit pro damper system makes it possible to win at the track, yet drive daily on the street as well.
The key component to the circuit pro damper system is its utilization of remote reservoirs that provide separate adjustments for rebound and compression, as well as nitrogen gas pre...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,856.60
Make a selection
Ngk iridium ix spark plug is designed to offer extreme ignitability, improved throttle response and superior anti fouling capacity. It is constructed from durable material that is corrosion and abrasion resistant. This spark plug features a fine iridium tip that ensures high durability and performance. It ensures longevity and can easily be installed. This spark plug is on heat range cooler than b7evix. Sold each.
General Fitment 911 1989-94 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high g-forces on the racetrack.
FVD has the solution:
The ?FVD motorsport? Oil pan has the baffling concept of the x51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 liters) of oil over the original x51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
The ?FVD motorsport? Oil pan is also designed with external cooling fins
Which helps to lower the oil temperature.
Models: Boxster, Cayman, 996 and 997 models (excludes 3.8 s, GT3 and turbocharged models).
...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $544.50
Make a selection
Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 298kw (405hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 253km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,1s tuning: max. Power - 312kw (425hp) @ 6000rpm max. Torque - 520nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,094.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|